Jump to content

Recommended Posts

Just to add weight to this, I have exactly the same problem - post SP1 update to .0415. Followed the instructions to the letter. Get the screen flickering every couple of seconds as described above and weather fails to load.

I have shut down my Firewall and AV software completely and no avail - even though REXE + is enabled and no record of it being blocked in either. Other info as needed follows:

1.) Operating system and version (32bit or 64bit) - Win 7 Pro (Version 6.1.7601), SP1 64 bit
2.) RAM memory size - 16Gb
3.) Video card and memory size - Radeon HD 6950 2Gb
4.) Overclocking? - Yes @ 4.6GHz (as with previous version of REX Essential Plus)
5.) Total hard drive space - Total all PC - 3.8Tb (drive with REX install - 2Tb with 1.32Tb free)
6.) Using REX in a network or not - Not used in a network
7.) Which version of Flight Simulator installed (including service packs) - FSx - Version 10.0.61637.0, SP2
8.) Internet connection active or not - Yes.
9.) Which antivirus software running - NOD32 Antivirus 6 (v6.0.308.0), Full license
10.) Whether or not firewall running - ZA Pro (v 10.0.250.000)
11.) Whether or not you are utilizing FSUIPC - Yes, unregistered version
12.) If there are any error logs in the REX/ErrorLogs folder, make certain to include in your post. - None
13.) Is UAC turned OFF in Windows - Off
14.) What folder is REX installed in - F:\Games\FSx\REX Essential Plus (this drive does not contain my OS)
15.) What folder is FSX/P3D installed in - D:\FSx (dedicated SSD)
16.) Do you start REX by RIGHT CLICKING the exe file and selecting RUN AS ADMIN EACH time? No, set to run as administrator. Have also tried using right click 'Run as administrator'.
17.) What is your RATE AT WHICH WEATHER CHANGES OVER TIME set to in FS? - 'No change'
18.) Did you use a flightplan from REX when experiencing the error(s)? No
19.) Did you make changes to the CONFIGURATION screen or are ALL the settings stock? Yes see screenshots below
REXE%2B%20Config%20-%20Visibility.jpg

REXE%2B%20Config%20-%20Clouds.jpg

REXE%2B%20Config%20-%20Winds.jpg

20.) What are your texture settings within the OPTIONS window? See screenshot below

REXE%2B%20Config%20-%20Options.jpg

Share this post


Link to post
Share on other sites

Thank you for the additional information that is very helpful. I do have a couple of additional items I need to confirm:

1.) In the Configuration Manager->General Tab do you have D:\FSx set as the location for the Simulator Folder Location?

2.) Also can you please open the WxTheme folder where REX is installed and post the current.asm file.

Share this post


Link to post
Share on other sites

1) Yes

2) There is no file in the directory you refer to that is .asm. I have as follows in the screenshot.

Posted Image

Share this post


Link to post
Share on other sites

I haven't tried tbh. As normally (in the past) I loaded REXE, then FSx, selected the airfield and then once the weather had loaded I would set the weather to 'user defined weather' in FSx and then check that it was showing the correct data for my chosen departure.

I can try sitting on the tarmac/fly to see if it loads, but normally the radar would show me at my departure airfield and show the weather loading, helping to confirm I was ready to go. WIll go and test and update.

*****UPDATE*****

I can report that REXE is successfully loading the weather within a few seconds of placing myself on the tarmac and that it also seems to be injecting the weather during flight, which is good news.

The initial radar map does not display until after FSx has loaded and in order to see it I need to task-switch, which is not ideal. Do you have a solution to this issue/will it be patched?

Thanks

Edited by tazisdylan

Share this post


Link to post
Share on other sites

That is great to hear that the weather engine is working now. In regards to the weather engine, we do not have an embedded / in-game gauge type program yet. Will their be a patch for this or not I cannot say.

Share this post


Link to post
Share on other sites

Can we mark this issue resolved or closed?

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • See our many awards!

×
×
  • Create New...